matt finish - 11 colours
formulated to prevent overlap marks these intermixable colours produce a professional finish
Formulated to avoid unsightly overlap marks, giving an even, lustrous finish. Polyvine Wood Dyes for interior or exterior use, are intermixable giving a limitless range of possibilities to colour and enrich the wood.
SKU : WCZM4
Price range : £8.25 to £8.25
click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
you may also be interested in this product
at a glance product info
- water wash up
- does not blister or peel
hardwood • softwood
available in: 500ml
drying time: 1-2 hours depending on temperature • coverage: 10-20 square metres per litre
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination. Remove oils and resins from oily hardwoods and resinous softwoods. Sand to a smooth finish and remove all dust.
Ensure product is well mixed. Pour into a suitable container and mix with other colour if required. Apply generously with a good quality brush, working with the grain and keeping a wet edge. Wipe off any excess quickly to get an even finish.
Different woods and woodgrains will alter the appearance of the wood dye. Apply to a test area prior to application.
Polyvine Wood Dye seals the surface but for added protection apply Polyvine Heavy Duty Wood Varnish, Polyvine Heavy Duty Floor Varnish, dead flat or satin, or Polyvine Exterior Varnish.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.
ask our expert