stone and brick protector

dead flat

polyvine stone and brick protector
polyvine stone and brick protector

dead flat

  • stone-and-brick-protector
  • stone and brick protector 1 litre
  • stone and brick protector 4 litre

absorbed into the substrate, this high performance coating protects interior and exterior stone and brick for a completely natural finish

A high performance water-based masonry protector and water repellent that penetrates into porous substrates forming a barrier to water, moisture, grease, oil acid, alkali and salts. Suppresses mould and fungal growth and the formation of salts on natural masonry surfaces.
It has a long service life, is highly UV resistant and leaves surfaces looking natural after application.

find a stockist buy online UK shop online abroad

buy online here for UK delivery


SKU : VSB1000
Price range : £23.48 to £84.31


go to basket



zoom click for a larger image

  • dead flatdead flat

Any colours shown are representations and should be used as guidance only.
Colours when applied will vary according to the material they are used on.

at a glance product info

  • interior - suitable for interior use
  • exterior - suitable for exterior use
  • chemical resistant - resistant to mild chemicals, alcohol, cleaning fluids, vegetable and fruit juice
    chemical resistant
  • quick drying - for areas of high traffic where a fast dry and recoat time are essential
    quick drying
  • microporous - allows the finished surface to breathe, repelling mould and other airborne contaminants
  • nano technology - the miniscule particles create extreme water repellence ensuring the coating lasts longer
    nano technology
  • water wash up - containers and tools wash in water
    water wash up

unique qualities: • waterproofs brick and stone • suppresses formation of salts on natural masonry surfaces •  improves weatherability • a moisture barrier - seals off the surface • resists penetration of grease, oil, acids, alkaline, salts • easily cleaned with mild soap and water

ideal for: stone • plaster • brick • slate • flagstones • fireplaces • exposed stone walls • brick walls • stone window ledges

available in: 1 litre • 4 litre

drying time: 15 minutes to 1 hour depending on temperature • coverage: 15-20 square metres per litre , depending on the porosity of the material

stone and brick protector
how-to video

application and advice


Do not use in temperatures below 5°c/40°f or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller.


Mix well before use.
For general applications on masonry, brickwork and stone, a single application will be sufficient.


Always test on a trial area before application. Apply evenly and do not allow to pool in crevices. Test for clarity over dark colours.
NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.


Store in unopened containers in a cool dry place away from direct sunlight. Protect from extremes of temperature during storage and application.

health, safety and the environment

Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.

ask our expert