Due to the Covid-19 emergency our factory and offices will be operating at a reduced level until further notice. We will be taking orders but you should expect them to take longer to deliver than normal.
We will fully re-open only when the government tells us it is safe to do so.
• vintage look • upcycling furniture • distressing • shabby chic • wood • stone • ceramic • primed metal • primed matt plastic
• velvet smooth • dead flat finish • rarely requires any surface preparation • works over old painted or varnished surfaces • covers in one coat • low odour • brushes and tools wash in water
at a glance product info
application and advice
Using one part Chalk Paint Maker to two parts matt emulsion, thoroughly mix together. All surfaces must be clean and free from dust, dirt or contaminants. Clean off any wax with white spirit. Prime bare metal and plastic.
Work in exactly the same way as the instructions on your emulsion paint can. Lightly rub down between coats.
For a distressed look, apply two coats of contrasting colours - when dry sand through top coat to reveal patches of base coat colour. Protect with Polyvine Chalk Paint Waxer.
Always try a test area before starting.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water. Do not empty into drains or watercourses.