Due to the Covid-19 emergency our factory and offices will be operating at a reduced level until further notice. We will be taking orders but you should expect them to take longer to deliver than normal.
We will fully re-open only when the government tells us it is safe to do so.
shopping basket0 item(s) - £0.00
available finishes; gloss for a shiny finish, satin for depth and a soft sheen, dead flat for a completely shine free surface.
• internal wood • fabric • paintwork • wallpaper (not vinyl) • plaster • murals • mouldings
• interior and exterior • quick drying • water resistant • stain resistant • abrasion resistant • microporous • UV filter protection
at a glance product info
UV filter protection
water wash up
food and child safe
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination.
Ensure the product is well mixed but do not shake. Thinly apply 2 to 3 coats of varnish. On porous surfaces dilute the first coat with 10% water. When using dead flat finish, for a high level of protection and stain resistance, apply 2 coats of satin then 1 coat of dead flat.
Always test for clarity over dark colours. Application over emulsion paint can draw contaminants through the paint film. Should not be applied over uncured oil based products. Test for compatibility before application. Not suitable for exterior bare timber or vinyl wall covering.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.