Currency
£ $

shopping basket

0 item(s) - £0.00
Your shopping basket is empty!
Welcome visitor you can login or create an account.

HICKSON DECOR

Display: List / Grid
Show:
Sort By:
hickson decor antislip
hickson decor antislip
slip deterrent finish
  • anti slip 1 litre
zoom  click for a larger image

A unique clear satin, UV resistant, microporous, high solid content protective antislip finish for application onto exterior wood flooring and decking.
The brush applied finish, containing special synthetic particles, produces an antislip finish by providing water droplet repellence and creating a textured surface.
It also gives protection to bare timber from the ageing effects of sun and rain. To provide extended durability to the timber, precoat with one of the Hickson Decor Wood Stain range.

ideal for
• patios • decking • utility rooms • steps
• jetties • swimming pools

unique qualities
• water repellent • does not blister or peel
• high solids for extra durability
• UV and water resistant • microporous
• biocides protect against algae, mildew and fungal attack


find a stockist shop online

at a glance product info

  • exterior
    exterior
  • water resistant
    water resistant
  • UV filter protection
    UV filter protection
  • microporous
    microporous
  • biocide boost
    biocide boost
  • high particle content
    high particle content
  • does not blister or peel
    does not blister or peel

available in: 1 litre • 2.5 litre



drying time: Touch dry 3-5 hours. • coverage: 9 square metres per litre, 90 square feet per quart, depending on porosity of substrate.


application and advice

preparation
New timber should be clean, non-oily and thoroughly dry. Remove all old coatings to bare wood. If the timber is not pressure treated apply an appropriate wood preservative.

application
New timber should be well sanded, non-oily and thoroughly dry. Old paint must be clean and sound. Lightly sand to key surface. Always remove leaves and decaying vegetation from the surface. Stir thoroughly before and during use. Do not apply below 5°C. Brush apply one coat evenly with the grain in a full flowing coat, do not overbrush. Wiping surface with methylated spirit will assist adhesion.

caution
Application rollers, sponges and pads, or clothes soaked in this product, may spontaneously combust if left. Dispose of after soaking in water.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
DANGER: Flammable liquid and vapour. May be fatal if swallowed and enters airways. May cause drowsiness and dizziness. Harmful to aquatic life with long lasting effects. Avoid release into the environment.
Read all instructions before use. Keep out of reach of children.
Not recommended for interior use on large surface areas.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use explosion-proof electrical, ventilating, lighting and all material-handling equipment. Contaminated cloths may self ignite without warning. Dispose of after soaking in water.
Use only in well ventilated areas. Wear protective gloves. Wear eye or face protection. IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF SWALLOWED: Immediately seek medical attention. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower, do not use solvent, thinners or white spirit. If medical advice is needed, have product container or label at hand.
Remove excess from tools and mixing vessels before cleaning with white spirits. Dispose of contents and container in accordance with all local, regional, national and international regulations.



ask our expert
..
£0.00
hickson decor waxcoat
hickson decor waxcoat
water repellent
  • Hickson Decor waxcoat 2.5 litre
  • hickson decor waxcoat   1  litre
zoom  click for a larger image

protects external wood against moisture ingress
This concentrated, clear, water repellent coating is formulated for the protection of externally exposed timber surfaces. When dry it provides water droplet repellence and protects wood against moisture ingress, warping, swelling, cracking and splitting and helps maintain timber in a bright, clean condition.

ideal for
• exterior timber • decking • fencing

unique qualities
• water repellent • protects against warping • protects against swelling • protects against cracking


find a stockist shop online

at a glance product info

  • exterior
    exterior
  • water resistant
    water resistant
  • microporous
    microporous
  • biocide boost
    biocide boost
  • does not blister or peel
    does not blister or peel

available in: 1 litre • 2.5 litre



drying time: Touch dry 3-5 hours • recoat time: Allow 24 hours between coats • coverage: 5-7 square metres per litre


application and advice

preparation
New timber should be well sanded, non-oily and thoroughly dry. Old paint, stain or varnish - strip back to bare wood, sand and clean, coat as new wood.

application
Stir thoroughly before and during use. Do not apply below 5°C. Brush apply one coat evenly with the grain in a full flowing coat, do not overbrush.
Recoating will be required every 1-2 years depending on degree of exposure. Clean down and lightly sand.

caution
Timbers containing high natural oils, e.g. Teak and Iroko, may inhibit drying and cause impaired adhesion. Wiping surface with methylated spirit will assist adhesion.
Application rollers, sponges and pads, or clothes soaked in this product, may spontaneously combust if left. Dispose of after soaking in water. Wear a suitable face mask if dry sanding.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Clean brushes and spillages with white spirit.
May produce an allergic reaction. Flammable. Harmful to Aquatic organisms, may cause long-term adverse effects in the aquatic environment. Keep out the reach of children. If swallowed, seek medical advice immediately and show this container or label. Use only in well ventilated areas. Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Restrict interior use to small surface areas such as doors, skirting boards and window frames. Not recommended for interior use on large surface areas. During spraying, wear suitable respiratory protective equipment. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser, do not use solvent, thinners or white spirit.



ask our expert
..
£0.00
hickson decor wood stain
hickson decor wood stain
translucent satin finish
  • wood stain 1 litre
zoom  click for a larger image

stains and protects wood
Specially formulated to provide practical advantages over alternative types of exterior finishes such as traditional paint, varnish or polyurethane, it is a complete finish in a single can, eliminating, if desired, the need for a separate primer or undercoat and providing low maintenance, long-term protection.
The translucent semi-gloss finish enhances and protects the natural appearance of wood.

ideal for
• window frames • doors • cladding • fascias • all internal and external woodwork

unique qualities
• highly UV resistant • long lasting protection • water repellant • allows wood to breathe • resists flaking and peeling


find a stockist shop online
options
zoom click for a larger image (Any colours shown are representations and should be used as guidance only. Colours when applied will vary according to the material they are used on.)
  • ebonyebony
  • light oaklight oak
  • mahoganymahogany
  • pinepine
  • pitch pinepitch pine
  • red cedarred cedar
  • redwoodredwood
  • teakteak
  • walnutwalnut

at a glance product info

  • exterior
    exterior
  • water resistant
    water resistant
  • UV filter protection
    UV filter protection
  • microporous
    microporous
  • biocide boost
    biocide boost
  • high particle content
    high particle content
  • does not blister or peel
    does not blister or peel

available in: 500ml • 1 litre • 2.5 litre



drying time: Touch dry 3-5 hours • recoat time: Allow 24 hours between coats • coverage: 11-18 square metres per litre, depending on substrate


application and advice

preparation
New timber should be well sanded, non-oily and thoroughly dry. Old paint, stain or varnish - strip back to bare wood, sand and clean, coat as new wood.

application
Stir thoroughly before and during use. Do not apply below 5°C. Brush apply evenly with the grain in a full flowing coat, do not overbrush. Apply three coats, allowing 24 hours between each.
Recoating will be required every 3-8 years depending on degree of exposure. Clean down and lightly sand.

caution
Timbers containing high natural oils, e.g. Teak and Iroko, may inhibit drying and cause impaired adhesion. Wiping surface with methylated spirit will assist adhesion.
Application rollers, sponges and pads, or clothes soaked in this product, may spontaneously combust if left. Dispose of after soaking in water. Wear a suitable face mask if dry sanding.

storage
Protect from extremes of temperature during storage and application.

health, safety and the environment
Clean brushes and spillages with white spirit.
May produce an allergic reaction. Flammable. Toxic to Aquatic organisms, may cause long-term adverse effects in the aquatic environment. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Keep out of the reach of children. If swallowed, seek medical advice immediately and show this container or label. Use only in well ventilated areas. Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point. Restrict interior use to small surface areas such as doors, skirting boards and window frames. Not recommended for interior use on large surface areas. During spraying, wear suitable respiratory protective equipment. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser, do not use solvent, thinners or white spirit.



ask our expert
..
£0.00

VAT and Delivery

VAT: All prices exclude VAT, which will be added at the checkout

Dispatch: Orders are dispatched on the next working day after your order is placed. The orders are then sent on a next working day service. There are no weekend deliveries. Deliveries outside mainland UK may take longer.

Delivery Costs: Delivery costs from £8.00 +VAT within mainland UK. Delivery to the Scottish highlands and offshore islands costs more. You will see the cost of your delivery at the checkout before committing to pay. Orders over £175 are delivered FREE

Returns
Faulty products that are deemed to be manufacturer error will be accepted free of charge. A 10% re-stocking charge will be made on returned items that have been refused delivery by the customer.