cascamite original
structural wood adhesive
  • cascamite original    125g
  • cascamite original    220g
  • cascamite original   500g
  • cascamite original  3kg
  • cascamite original 1.5kg
  • cascamite original 25kg
zoom  click for a larger image

powdered resin wood glue
Specifically formulated for exterior joinery exposed to weather. This adhesive produces a bond stronger than the timber itself. The powder system gives extremely good gap filling properties, ensuring rain does not enter the joint. Use externally where a high bond strength/gap filling is required.

ideal for
• exterior joinery • windows • doors • gates • garden furniture • shopfitting • interior joinery • kitchens • worktops • bathrooms • veneering • laminating

unique qualities
• clear glue line • non staining • gap filling • does not discolour hardwood • load bearing • makes 50% more when mixed • fast bond build up • mould resistant

find a stockist shop online

makes 50% more

25kg currently not available to buy online

at a glance product info

  • interior
  • exterior
  • water resistant
    water resistant
  • quick drying
    quick drying
  • biocide boost
    biocide boost
  • dries clear
    dries clear
  • gap filling
    gap filling

available in: 125g • 220g • 500g • 1.5kg • 3kg • 6kg • 25kg

drying time: 18 hours at 10°c, 7 hours at 15°c, 3 hours at 20°c • curing time: check remainder of mixed glue, cured when hard • coverage: 100-250 grams per square metre

application and advice

Mix by either weight or volume. Mixing by weight will give the most accurate and consistent glue mixes. Use two parts Cascamite powder to one part cold water. If mixing by volume, 3.5 measures of Cascamite powder are required to 1 measure of cold water.
For both methods mix as follows:
1. Put half the cold water into a non metallic mixing vessel.
2. Add all the Cascamite powder and stir until dissolved.
3. Add all the remaining water and stir until the mixture is smooth.
4. It is now ready for use and will remain usable for about 1 hour at 15°c

Use a stiff brush to apply adhesive to one surface only. Assemble and clamp (pin or screw) the joint whilst the glue is still wet. Keep the joint under pressure until set (around 6 hours at 15°c, longer at lower temperatures).
A damp cloth should be used to remove excess wet adhesive from the joint.

Synthetic glues may cause dermatitis in some people. As a precaution, any glue spilt on the hands should be removed immediately with soap and water before it sets.
Avoid the formation or spread of dust in the air. Wear suitable protective clothing, gloves and eye/face protection.

Store in a cool, dry place with the lid tightly closed.

health, safety and the environment
Ensure good ventilation. Keep out of reach of children. Contact with eyes - wash immediately with warm water. Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.

ask our expert

find the right product for the job - adhesives

interior wood glue cascaphen cascarez fast grab wood glue cascamite wbp cascaphen cascamite original cascatact interior wood glue cascamite original cascatact cascamite wbp cascarez fast grab wood glue


Polyvine on social media


facebook instagram twitter pinterest