• wood • chipboard • laminate • metals • glass • ceramic • polyurethane • expanded and extruded polystyrene • concrete • stone • bricks • gypsum boards
• maximum strength one part polyurethane • excellent chemical resistance • exceptional bond strength • can be stained and painted • fast setting • water resistant to D4 classification • foams slightly on application to increase overall bond strength
Ensure all surfaces are clean, dry and free from grease, oil or
any other contaminants. One of the surfaces must be porous. Abrade non-porous surfaces.
To achieve maximum bond strength and assist cure, slightly moisten one surface with a damp cloth. Apply a thin layer of adhesive evenly to one surface only. Assemble parts immediately and clamp.
storage and safety
Protect from extremes of temperature during storage and application.
health, safety and the environment
Avoid eye contact. In the event of contact wash with running water for
15 minutes and seek medical attention. Wear goggles. Ensure good ventilation. Do not breathe vapours. Harmful by inhalation. In case of insufficient ventilation, wear suitable respiratory equipment. In case of accident or if you feel unwell, seek medical advice immediately (if possible show the label). Avoid prolonged contact with skin. Wear gloves. In the event of contact, drench skin with running water for at least 10 minutes. Seek medical advice if burns appear on skin or signs of poisoning are evident. Thoroughly wash hands with soap and water or a proprietary hand cleaner after use. Keep out of reach of children.
Do not empty into drains or watercourses.
Download a data sheet for full safety, handling, use and storage.
Download the datasheet here