An extremely durable, high quality coating with a satin finish that dries to a stain resistant film. Preserves the natural appearance of the wood.
Dramatically reduces yellowing characteristics compared with Polyurethane Varnishes.
For a dead flat finish with high durability and stain resistance, apply one or two coats of satin followed by one or two coats of dead flat.
• hardwood and softwood doors • kitchen worktops and cabinets • bar tops • tabletops • counters • bookshelves • wood panelling • protection of oil-based glazing or broken colour work
• extra low yellowing • non reflective • easy to apply • highly heat and water resistant
at a glance product info
available in: 500ml • 1 litre • 2.5 litre
drying time: 2 hours • recoat time: 6-8 hours • curing time: 24 hours in ideal conditions • coverage: 15 square metres per litre
application and advice
All surfaces must be clean and free from dust, dirt, oil and contamination.
Ensure the product is well mixed. Apply 2-3 coats of varnish and brush out well. On new wood and porous surfaces dilute the first coat 10% with white spirit. Lightly sand wood in between applications to remove any raising of the grain that may have occurred.
Always apply to a test area before starting work. Appearance may vary according to the colour and type of wood and the number of coats.
Avoid applying in cold or damp conditions as this will delay drying.
Protect from extremes of temperature during storage and application.
health, safety and the environment
Flammable, keep away from sources of ignition - No Smoking. Keep out of reach of children. Use only in well ventilated areas. Ensure maximum ventilation during application and drying. Restrict interior use to large interior spaces or in confined spaces, wear a face mask which is designed to prevent inhalation of solvent vapours. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser - DO NOT USE SOLVENT, THINNERS OR WHITE SPIRIT. Remove excess from tools and mixing vessels before cleaning with white spirits. Toxic to aquatic organisms and may cause long-term adverse effects in the aquatic environment.
Do not empty into drains or watercourses.
Some local authorities have special facilities for disposing of waste coatings. To avoid risk of spilling, always transport and store in a secure upright position.