shopping basket0 item(s) - £0.00
• stone • plaster • brick • slate • flagstones • fireplaces • exposed stone walls • brick walls • stone window ledges
• waterproofs brick and stone • suppresses formation of salts on natural masonry surfaces • improves weatherability • a moisture barrier - seals off the surface • resists penetration of grease, oil, acids, alkaline, salts • easily cleaned with mild soap and water
at a glance product info
water wash up
application and advice
Do not use in temperatures below 5°c/40°f or in very high humidity. Stone and brick protector should be used as supplied, without dilution, by brush, spray or roller.
Mix well before use.
For general applications on masonry, brickwork and stone, a single application will be sufficient.
Always test on a trial area before application. Apply evenly and do not allow to pool in crevices. Test for clarity over dark colours.
NOTE: A chemical reaction could take place on some substrates such as glass, glazed surfaces, lead or aluminium. Mask these materials before application. In case of contact, rinse thoroughly with water immediately.
Store in unopened containers in a cool dry place away from direct sunlight. Protect from extremes of temperature during storage and application.
health, safety and the environment
Non-hazardous. Ensure good ventilation.
Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.